Відео

the link to the source has certification problems, so it doesn't work

Hi, You did not show in detail how to initate the start of the milling. I used a cnc file created by flatcam and loaded it into Candle, but get stuck with a M6 command

Awesome thanks!

Great video! Now in June 2024 my Arduino IDE is version 2.3.2. For the board I use the ATTiny25/45/85 in the ATTinyCore submenu. Programmer: Arduino as ISP. To avoid getting "A programmer is required..." error message I have to use Sketch -> Upload Using Programmer menu item instead of Sketch - > Upload. Then everything works for me.

Would be nice if it could cut the copper layer on the pcb

why do you need remove voltage regulator for a sleep mode?

Wow, so many steps, Pretty sure my Gran won't be able to do this.

Yeah ive had my ocb for 30 years and there is s not much oxidation without soldermask either so. Still works

Super helphull Thanks!

I'm unable to cahnge the Cut Z value, it's greyed out, why is it?

*Dont forget u can overclock ESP-01 to 160MHz...*

Thank you guys for providing quality content, I'have tried to order the original one but the site in Chinese where you bought it from, or where I could find it

I don't see the benefit, compared with just cutting the power supply... this result in absolutely ZERO power consumption. There are simple boards with a relay for ESP8266-S01, just feed the power through the relay and the button bypass the relay, that's it. No removal of resistors, no soldering, no additional parts (expect the relay board... and the battery will last for ever in power off :-)

So good！

Hmm i was hoping you could explain why HC-SR05 has 5 pins and not 4 like the 04

How… I have it, but still learning how tou use it 😅

what type of engraving tools to make pcb?, what degree? (15, 30, or 60°?) And what type for making masking text?

Thanks, clear tutoring!

Imagine that viking inverted. Black in the shadows under the sleeves. White where the light hits his cheeks and on the top of the shoulders, etc.

Gracias por su aportación, saludos desde Mexico.

This works great if you never want the Nano to wake up again...

in longer ray5 , how many millimeters is the length of the following profiles? 1 - x-axis frame profile 2 - left and right frame profile 3 - rear and front frame profile Thank you for telling me the exact size of these profiles

@DIYTECHBRROS can you please tell me what is the antenna name that you use on both sender and receiver toreach 1800meters, because i just reach 500m with the spring antenna and further it not go so please help what is the name of the antenna that use on the both side to reach to 1800meters

Excellent tutorial, do you think it will be possible to use ESP32 instead of Arduino?

The option for Arduino as ISP (ATTinyCore) did not appear for me. I set my programmer setting to Arduino as ISP and would get an error saying I am missing a programmer. All I had to do was instead of clicking upload, I had to click on the sketch tab and select upload using programmer. It worked perfectly after that.

de cuanto es tu diodo?

Great video. Is there a chart of this information with the type of antenna used?

The ESP-01 can be also used as wireless connection module and can cooperate with any other MCU board. The benefits of this is that it simplifies the program for the main controller and you can put all the network and security stuff inside the ESP-01. I also made an instant serial connection between two ESP-01s via websockets, it acts like a virtual wire between two devices. By doing it this way, the code for the main controller is very simple and all complicated connection and security stuff is done by the ESP-01. The main program handles only two states, connected or disconnected, that's all. A very clean solution.

why are these guys touching their wangs together? looks like they are talking to us while embracing each other around the waist. super weird....

Thats an interseting tool, 3 in 1: wirestripper, wrapper and unwrapper. I had 3 separate tools for it.

👍👍👍

WHAT KINDA MATERIAL IT IS?

why plot area in flatcam is black

আসসালামু আলাইকুম ওরাহমাতুল্লাহ ভাইজান আপনার imo অথবা whatsapp নাম্বারটা কি দেয়া যাবে আমি কিছু বক্সের অর্ডার করবো

What kind of stone is that?

best Flat cam tutorial ever! many thanks dude! Cheers from Colombia

That’s fuxking disgusting 🤢

🎉thx from german

Awesome but I'm concerned about that thin hoop, it might tear off because of wear and tear😅😅

When i open the serial monitor , the hc12 makes error , please where is the problem ? , what thing i should figure out to?

Merci pour vos conseils J'ai besoin d'une nouvelle machine avec pour Objectif - Réussir de façon excellente la gravure d'images - une grande surface de travail Que me conseillez-vous ???

Hey i want to buy this mechine what is it's cost?

Thanks for this. Was not sure how I used the UV solder mask ink. Just one question, was it just Isopropyl Alcohol you used or in other video I have watch, they use 'PH Increase' with water?

You are a best what uv light using in wat and is this a dynamask 15CMx2M PCB Portable Photosensitive Dry Film for Circuit Photoresist Sheets 1M Brand New For Plating Hole Covering Etching

show de bola jaja vou construir um.. os botoes 1 jogador e 2 jogador qual a finalidade

Where u got this honeycomb?

Niopi mu niopi

where can be found file for engraving

1:30

I have the 3018 as well and when trying to engrave onto some acrylic, I get different problems on each attempt. It's really frustrating. Sometimes it seems that the bit doesn't raise by enough to clear the engraving, gets snagged and then the rest of the engraving is offset sometimes but more than a centimetre. Do you have any tips for this particular problem?